I will respectfully disagree with Bean....
Buckets are thin and the plastic easily deforms (flattens) to form a tight seal with a bulkhead fitting. the amount it deforms is small... my bulkheads haven't leaked on mine.
Uniseals need a pretty round hole to seal in--I've never had to cut one out so don't know how dificult it might be and if there are issues with it sealing due to lack of roundness-- this being said I'm not saying you shouldn't use a uniseal-- my point is that a regular bulkhead works fine.
For size I used a 3/4" going in and a 1" coming out-- supplied by a maxijet 1200...
__________________
Bill
"I don't want to achieve immortality through my work, I want to achieve immortality by not dying"-- Woody Allen
|