Quote:
Originally posted by Tennsquire
You do need some extra room for the gate valve. I have had an older CS6-1 for years (same specs as the RS 100). I found that it works much better with the gate valve (old riser tube was a pain) and a bigger pump (Sedra 5000 vs 3500). I did put the air valve on it originally, and it helps to fine tune it. Now, I run it wide open. Try a bigger pump on it if you can get your hands on one; it's a very different skimmer with a bigger pump. You'll be amazed.
|
Thanks Tennsquire. I may hold off on the gate valve. Im not having much of a problem adjusting the height with the tube. But I will look into the larger pump.