|
I had a diagram of the one I built, but it is very simple.
3/4" to 1/2" bushing attached to a 1/2" to 3/4" bushing. I use a MPT to FPT, but you can use a glued fitting. Drill a 1/4" hole in the middle, attach a 1/4" tube -- make sure it's higher than the water level, and you've got your venturi. No muss/no fuss!
__________________
Fishie (MASLAC member)
"It's alaways a sometin'" -- Roseanna Roseannadana
|