|
I have mine seperated with a wall. I made it with 2x4's and insulated it with a plastic vapor barrier on the fishroon side. I haven't quite finished sealing up between the joists but it is still better than it was. I also run a dehumidifier most of the time in my shop. The tables on the saw, jointer, drill press etc all need a little attention pretty regularly to keep the rust off even with all that. If you wax the tables with some good paste wax that will also help but as Cannarella said, be carefull of what you use as the wax can get on your wood and make staining and finishing operations a lot harder.
__________________
Robbie
|