View Single Post
  #5  
Old 10/26/2007, 11:33 AM
CleveYank CleveYank is offline
15 & Over Club
 
Join Date: Feb 2000
Location: Beachwood, Ohio, The United States
Posts: 872
You running barebones w no prefilters??

Are you running at least 1 and hopefully two stages before the Membrane???????????????

If you are barebones with no carbon block and no pre-filter in 1 and .05 micron then you will hammer your membrane fast. IE the membrane is doing all the work.

(1/2 micron is not required and is probably excessive by most BTW)

For example MY RO/DI setup.
I have 1micron, then 1 micron carbon, and 1/2 micron then membrane, then DI stage 1 and DI stage 2

OR do you have the tubes going the correct route. Get up to 4 and 5 stages and same color tubing and in a hurry during setup you could have bypassed other stages.

???
__________________
Two little old lady's are sitting on a parkbench and the one little old lady says " My Butt Fell Asleep". The other little old lady yells back " Oh Yeah...Well A Minute Ago It Was Snoring!!"