Quote:
Good question if you go back to page 1, this is what I found
as for power failures your tank will be in trouble before the denitrator
|
freeky, I read that thinking ...do i remember this... go back to the page and Id hope I did know that. OOH well its all good.
Quote:
ok, I know this is an old thread... I am moving into a 120 and it will eventually be stocked on the heavy side, so... let me get this strait:
|
sounds like a plan to me
Quote:
I want 2-3 coils of 75' ea in a 4 or 6" x 24"?
|
.... I remember this also
use the smallest setup you can fit the tubes into.... those sizes are to big.
Quote:
Would 2-3 coil denitrators be better than 2-3 coils in 1?
|
no 1 is better
Quote:
With flow control on each input line or just on the 1 effluent?
|
whichever it only effects how you cycle the unit. put a on/off (ball valve or other) on both input lines and output lines it makes maintaining the unit easier as time goes on.
Quote:
Also, I really like the idea of using a coarse grade aragonite to help with pH issues, should I use it alone or with bioballs?
|
re read the thread use your aragonite elseware and use bioballs here.