Here is a shot of the Oceans Motions 4-Way with a Dart in the background. When I first plugged the OM in it didn't spin so I had to take the whole thing apart to see what was wrong.....turns out I got a drip of PVC glue in there and it jammed the inner spinning drum. It was easy to remove and it worked perfectly afterwards!
Here are my two drains in the sump. The lower valve goes to the return pump and chiller. The upper one is a drain for water changes. The drain will be connected to a pump to do quick draining.
Here are the two overflow pipes with ball valves. One goes directly into the skimmer and the other just drains into the sump.
Here is the line into the skimmer:
Here is the tank being filled to test all the bulkheads and unions for leaks. Only a couple found and fixed:
More to come later!