|
I know what you mean about the stand. I had to break out the roto-zip with the tank already on the stand because my 2x4s were on side vs on edge. Sawdust in the eyes was my punishment!
However, your holes should probably be about centered in your overflows, so that's another thing to consider about the hole placement. The builder can only do so much depending on the dims of the overflow.
Sorry your communications are not going smoothly with your builder. To me, that would give me 2nd thoughts right away. If communications are not good placing the order, dont expect much after the order is placed.
__________________
~.~.~.Squeak.~.~.~
|