|
I just went to FAOIS and re-upped on some salifert kits today actually...
Alk = 4meg/L
Cal = 380 (needs to be raised)
Phos = .03 or less
NH4 = .25 or less
NO2 = .1 or less
NO3 = .2 or less
(the or less's are because I'd rather error on the side of "too high" on the bad params, then to let it slide and say zero, even if it is really closer to zero).
PH is usually around 8.1-8.2 (electroic monitoring)
salinity is kept around 1.025, but my refractometer recently broke and I need a new one!
Temp is kept within 1 degree of 79.5 by my reefkeeper controller.
I don't test for anything else, but would like to know what my Mag, silica, and Iodine is at.
I use IO reef crystals salt, mixed from RO I make (TDS 000-001) and dose 2-part (although not as regularly as I should). I use the WM 2-part, but will be switching to ESV B-ionic when my supply of WM is gone. I also might switch from IO Reef Crystals to tropic marin pro reef...
How about you?
|