|
OK here is a tentative list that I started. Please feel free to add to it or ask questions about it...
Stuff to get from Fish Store (Donations?)
1 - Euro Reef skimmer
3 - Eheim-JAGER TS Heater - 250 watt
1 - Large Roll of Filter Floss (Are we going to use this?)
1 - Warner Marine PHOSaR Phosphate Remover 4000 Gram
1 - Black Diamond Carbon 68 oz - MarineLand, 3.65 L
6 - Mesh Nylon Media Bags
1 - Return pump (We still have to decide on this pump)
1 - Icecap VHO Retro
2 - Icecap Vortech pumps
1 or 2 - 72" (VHO, T12) Super Actinic R, 160W -URI
1 or 2 - 72" (VHO, T12) 10,000K Aquasun, 160W -URI
3 - 5 gallon buckets of instant ocean synthetic salt
1 - RO/DI 100 Gallon per day units
2 - ¾” threaded male penductors
1 - Reefkeeper to control fans, heaters, powerheads, and lights
2 - ¾” Uniseal Slip Seal Gaskets
2 - 1" Uniseal Slip Seal Gaskets
2 - AQUA LIFTER VACUUM PUMPs
2 - PRE-FILTER FOR AQUALIFTER
1 - Aqualight Digital Power Center
1 - Top Off of some kind (Maybe a Reef Fanatic Level Controller w/2 Float Switches?)
1 - Hydrometer or Refractometer of some kind (open to suggestions)
1 - Set of Salifert Test Kits (Let's get a bunch)
Stuff to get from local stores (Cash)
1 - Large bag of Dow Flake
4 - Boxes of Baking Soda
2 - Honeywell FAN SUPER TURBO HP BK Sump Fans
4 - Extension cords
4 - Power strips
2 - 10' long 1” PVC pipes
1 - 10' long ¾” PVC pipe
8 - 1” 90° PVC fittings
8 - 1” 45° PVC fittings
8 - 1" PVC Unions
1 - 1.25" PVC Union
2 - 1.25" PVC T fitting
1 - 1" PVC T fitting
3 - 1.25" PVC male to 1” female reducer bushings
3 - 1" PVC male slip to ¾” female threaded reducer bushings
1 - 1.25" threaded to slip PVC connector
1 - 1.25" threaded PVC reducer size depending on pump
2 - 1" PVC ball valves
1 - 1.25" PVC ball valve
1 - 100 gallon rubbermaid brute container for sump
1 - 5 ft. long ¾” Vinyl Tubing
1 - 5 ft. long 1” Vinyl Tubing
2 - ¾” male threaded to male barb adapters
2 - ¾” vinal hose clamps
2 - ¾” PVC cross fittings
8 - ¾” PVC 90° fittings
8 - ¾” PVC Endcaps
1 - panel of Light Diffuser (Egg Crate)
1 - 20' roll of 1/4" OD Tubing
__________________
Nate
|