starboard
 

Looking for a local reefer that has this in there tank. I would like to see the stuff in a tank. Want to go BB and this is a nice option for the bottom of the tank. maybe



next option my be to make my own. I have seen a thread hear that some one poured a clean coating over a shallow sand bed and it hardens to make it one peice. then it is sealed to the tank. I will look into that also.

Thanks

Go to see John's tanks at FAIOS or ask checkinhawk, I saw it on his thread.

if you want to take a look i dont mind but it is a long drive to see it.it is more or less covered in coraline algae already.

what do you think about it? any recommendations? would you do anything different?

Roger

i like it overall,i recommend that it be cut as close as possible to the tanks inner dimensions.only thing i would have done different is to silicone the edges so detritus doesnt get under it.

I am planning on siliconeing the edges for sure. how much flow do you have?

approx 15000gph

in a 150gallon?

does that include your return pump?

you running closed loop?
What pumps?

yes 15000gph in a 150g,i have 2 darts(one for return and one for closed loop)1 wavebox,1 6025 tunze nanostream and 1 mj1200 with an ecomod kit.the closed loop has 6 outlets the return pump has 4 outlets.

wow that is some flow.

Do you have a video in photobucket or anything that I can see the flow?