Entire Setup for Sale in Las Vegas
 

Okay, as many of you know, after my new system was up less than 6 months, I had to move. Unfortunately, during the move, I lost everything. I have a feeling it will be a long time before I will get back into this hobby (but I will), and when I do, I'll want the latest and greatest equipment. Because of that, there isn't much point in me having all of my current equipment just sit around. Here is what I have to offer, buyer pays for shipping:

[B]First price is either what I paid or what the item would cost to buy new. Second price is the price I'm selling the item for.[/B][list][*]29-Gallon Acrylic Tank/10-Gallon Sump/Stand/Bulkheads/Durso/Fan $500 $250 [*]OceansMotions SuperSquirt (with 4 unions attached) $205 $180[*]Iwaki MD40 RLXT (Japanese Motor) $265 $200[*]EuroReef ES5-2 (handles up to 75 gallons) $250 $220[*]Mag 7 $55 $50[*]Mag 2 $35 $30[*]Sunlight Supply ReefOptix III+ Pendant $100 $75[*]IceCap 250W Electronic Ballast $120 $100[*]Pheonix 14,000K 250W DE MH Bulb $70 $35 [*]Custom Built Automatic Top-Off System $50 $50 [*]Neptune Systems AquaController Jr (backlight) w/ Temp and pH probes $250 $225[*]Custom Built Electronic Control Panel with 10 GFCI X10 controlled receptacles, each manually switchable with American DJ PC-100A $150 $100 [/list]Total package would be around $2,000 new (I'm sure I spent more), but I'll sell the whole setup to somebody local (Vegas or Souther California) for $1,200 (plus I'll throw in some extra stuff I have). [B]If I have to part out, the prices listed are firm.[/B]

Thanks, and feel free to post questions about the equipment, but don't ask me to lower the price.

-Scott

Okay, a few comments...

MH bulb is about 6 months old.
I'm located in zip code 89129 (so you can figure out shipping)
Finally, any offers I receive will be put on hold for about a week because I would rather sell the whole system. If I don't have any offers in a week or so, I'll start parting out.

-Scott

And by the way, if you buy the tank, OceansMotions Supersquirt, and the Iwaki MD40, this is a PERFECT closed loop system. The tank has 6 holes drilled in it, 2 for intake and 4 for the output of the OMSS. The bulkheads, ball valves, unions, and Spa Flex pipe would probably cost over $100.

-Scott

Interested in the Pheonix bulb.YGPM

If you part out, I'm interested in the RO III and the Ice Cap Ballast.

Thanks!

Do you have a picture of your control panel?

[QUOTE][i]<a href=showthread.php?s=&postid=7232927#post7232927 target=_blank>Originally posted</a> by bradleyj [/i]
[B]Do you have a picture of your control panel? [/B][/QUOTE]
Yes, PM me your e-mail address