what type of my this ballast ?
dear sanjay joshi,
please id of my this ballast. what type of this ballast ? m59, m80 or m59 or else ? [IMG]http://img.photobucket.com/albums/v644/jaefei/ballast.jpg[/IMG] |
M-58, for 250 watters
|
thanks for reply...is that just similar or is that true m-58 ?
|
M-58 is a generic classification for 250w wire wound ballasts, it's an M-58 either way you look at it.
|
1. what MH bulb brand recomended to that ballast ? BLV or XM
2. is that pulse or probe type ballast ? |
1. what MH bulb brand recomended to that ballast ? BLV or XM
2. is that pulse or probe starting method ballast ? |
1) XM are the most bang for the buck and what i use.
2) Pulse, which is generated by the start-up cap |
what is the different between M58 and M80 ? only the amperes ?
|
an M80 is for double ended bulbs (HQI). both are 250w ballasts.
|
what things make the different between ballast for SE and DE ?
sorry, are you Mr sanjay joshi ? |
No, I'm not Sanjay but i thought you might like an answer to your questions so i offered my assistance.
|
okey.thanks for all your replies.
what ballast are you using now for your MH ? |
IceCap and ARO electronics, i did away with all my magnetic coil ballasts due to the heat the produce. the savings on power using the e-ballasts v/s the coil isn't overly high, I'd venture to say 10-15% but the heat difference of the ballast is a world of difference.
|
All times are GMT -5. The time now is 01:44 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.