Reef Central Online Community Archives

Reef Central Online Community Archives (https://archive.reefcentral.com/forums/index.php)
-   Saint Louis Area Saltwater Hobbyists (SLASH) (https://archive.reefcentral.com/forums/forumdisplay.php?f=414)
-   -   need help from all you skimmer gurus (https://archive.reefcentral.com/forums/showthread.php?t=1273920)

panaboy95 12/17/2007 09:04 PM

need help from all you skimmer gurus
 
Well i changed over my G3 to the 150 i cleaned the pump. now it is not working right it is producing next to no bubbles. i am not sure but the pump looks like it is not moving as much water as it used too. i have had the pump apart three times. everything looks good but i am not sure what the problem is. i know it is hard to tell me without looking at it but i was just wondering if anyone has had the same problem. it is a sedra 5000 i hate to buy a new pump. i plan to buy a new skimmer in a couple of months. i do not want to spend 100 dollars on a skimmer i am going to use for a few more months.

chadfarmer 12/17/2007 09:15 PM

clean the air line tube

down to the venturi

geoxman 12/17/2007 09:15 PM

blow in the air tube when first plugged in

chadfarmer 12/17/2007 09:15 PM

is this mesh modded?

if so try to blow in it

dphins 12/17/2007 09:29 PM

Try throwing it! Sometimes it works for me.:) Especially when it's not your $900 skimmer.

panaboy95 12/17/2007 09:33 PM

ya it is mesh modded i have blown thru the tube several times and the i just blow air out the input. i just don't think the sution side feels like it is doing much.

JxMetal 12/17/2007 09:37 PM

somethings probbaly stuck in the intake. Tkae it apart. You probably have a grain of sand stuck in it.

chadfarmer 12/17/2007 09:51 PM

take it out of the water turn it on and add the air
than back in the water

levon15 12/17/2007 09:57 PM

What were you using before?

chadfarmer 12/17/2007 10:03 PM

even try to trim down the mesh some

zt444a 12/17/2007 10:22 PM

I have had build up sort of encrust around the nipple where the airline attaches. As soon as I stuck something in and gently cleaned around it, I actually heard and then saw the stuff the flaked off and BANG! Good as new....

panaboy95 12/17/2007 10:32 PM

Well i figured it out right before i threw it across the room. the venturi was clear and i blew throught the hose and it seemed clear but i got a new peice of hose and put it in and it started working better. it still is not skimming the way i want but i will have to let it settle down a little i had it all out of adjustment working on it. i also redid the mesh mod i think it was a little flat. thanks for all the help. you guys are lifesavers.

panaboy95 12/17/2007 10:33 PM

wow farmer you must have just changed you avitar last time i read this thread it was diffrent.


All times are GMT -5. The time now is 11:28 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.