Koralia powerhead ?
I have a Koralia 3 pump in my 55 gallon, and I was wondering do you all (that own Koralias) use the endcap on it, or take it off? I know it's for protection, but I've found with the endcap off, it puts out a much wider, better flow....so do you use the protective endcap or take it off? Do I really need it?
|
I had never heard of it for protection. I always heard it was for narrowing the flow pattern coming out of the pump. I run 2 4s with out it and 1 4 with it.
|
I run mine without the endcap. No problem what so ever.
|
I just got one yesterday. I'm going to leave the endcap off - the reason I got this pump was for the wide flow (and low power reqs).
|
I run a K3 in my 55 with the endcap on. I never though of taking it off.
BTW - We whooped ya'lls but today!!!! |
I run mine with them off. Then again, I don't think the #2's come with them...
|
I have them off
|
No end caps on my K4s
|
Ever since a snail made his way inside and jammed the propeller, I leave mine on. I had the earlier model which did not come with the end cap.
|
I leave mine on because I have a lawnmower blenny that loves to sit in there when I shut them off and it would chop him up when I started it back up with him in there. If you never shut them off or you don't have any fish that "perch"
then I probably would leave them off. |
Are you talking about the shroud?
So, does that mean you run the propeller bare? Hmm, that would definitely make them easier for me to clean. |
[QUOTE][i]<a href=showthread.php?s=&postid=11400482#post11400482 target=_blank>Originally posted</a> by SurfnFish [/i]
[B]I run a K3 in my 55 with the endcap on. I never though of taking it off. BTW - We whooped ya'lls but today!!!! [/B][/QUOTE] If Phillys "D" played like that every week... they'd be undefeated instead of the Pats'. |
No end caps here
|
Doesn't the end piece suppose to add wider flow?
|
No, it narrows the flow and takes the V shape out of the flow pattern.
|
[QUOTE][i]<a href=showthread.php?s=&postid=11400854#post11400854 target=_blank>Originally posted</a> by Fraggle Rock2 [/i]
[B]Are you talking about the shroud? So, does that mean you run the propeller bare? Hmm, that would definitely make them easier for me to clean. [/B][/QUOTE] I actually would like a little clarification too. :D |
Same here, I have the shroud thing and I get a V flow pattern...
|
I run my 2 K2's without the caps... the flow is much wider :)
|
I think they mean the small plastic tubes that come with the newer models, I cant see no guard as the magnet and prop would most likely fly off on start up.
|
Ahh. That makes sense lol.
|
I put the flow-narrowing-thingamajigs on my two Koralia 3s, I wanted a narrower stream. Without them, I get pretty serious substrate dunes.
It's nice to have that flexibility; I can't think of any other pump that can do that... there are many where you can adjust the flow but not the spread. |
There's a cap you can put over the output of the Koralia to narrow the stream a bit. I had one in my box, but I don't use it for my Koralia 2. And I've yet to see any pics with that attachment on it, except for a pic at MarineDepot. Here are a couple links to those.
[url]http://www.marinedepot.com/IMD/600/HD19201/HD19201_3.jpg[/url] [url]http://www.marinedepot.com/IMD/600/HD19201/HD19201_4.jpg[/url] |
[QUOTE][i]<a href=showthread.php?s=&postid=11402600#post11402600 target=_blank>Originally posted</a> by MrSpiffy [/i]
[B]There's a cap you can put over the output of the Koralia to narrow the stream a bit. I had one in my box, but I don't use it for my Koralia 2. And I've yet to see any pics with that attachment on it, except for a pic at MarineDepot. Here are a couple links to those. [url]http://www.marinedepot.com/IMD/600/HD19201/HD19201_3.jpg[/url] [url]http://www.marinedepot.com/IMD/600/HD19201/HD19201_4.jpg[/url] [/B][/QUOTE] Thank you! That makes much more sense... I didn't get those with my 2 last year. |
[QUOTE][i]<a href=showthread.php?s=&postid=11402673#post11402673 target=_blank>Originally posted</a> by kelley_mc [/i]
[B]Thank you! That makes much more sense... I didn't get those with my 2 last year. [/B][/QUOTE] Send hydor an email with your address and ask if they will send you them. I asked and they sent them in a few days!! Awesome customer service. I run 4 on and 4 off. =] |
You're welcome. :) They must be something they're including with newer models. It's amazing how difficult it is to find pics of those attachments. Probably because most people don't use them. But they could be useful for some applications.
|
All times are GMT -5. The time now is 05:30 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.