Where do you get those huge industrial-sized PVC pipes? Are they expensive? I want to do this:
[url]http://www.reefrancher.com/diy/halfpipe/[/url] |
That is a sweet looking DIY light setup. I've seen the large size pvc at HD, but in black. You could just paint it white with the krylon plastic paint to maximize reflection.
I'd figure out a way to mount some UV glass to protect the bulbs from breaking. |
No need for UV glass as the SE bulbs are already shielded.
|
If you need to polish a scratch out of an acrylic tank, this is the cheapest place I've found micro mesh: [url]http://www.woodchipshome.com[/url]
|
Could anyone tell me where to get a few 1' uniseal online.
Thanks |
[url]www.aquaticeco.com[/url]
has them but they are much smaller than 1 foot. ;) |
Saltz, Thanks for the infor.
|
Anyone know where to get large O-rings and Gaskets 6-8"
|
O-rings are easy, buy a DIY kit. Comes as a roll of material with splicing cement. I will check and see where mine came from when I am in the shop next. Gaskets can be purchased in "Sheet" form as well. They are a bit tougher to work with IMO as unless your cutting utensils are razor sharp, you can tear the rubber pretty easy.
|
Something like this?
[url]http://www.usplastic.com/catalog/product.asp?catalog%5Fname=usplastic&category%5Fname=59&product%5Fid=12117[/url] I'm sealing the top lid of a calcium reactor to the flange. Also plan on build a skimmer collection vessel and possible extra chamber with left over materials. Found this too [url]http://www.marcorubber.com/splicing_kit.htm[/url] |
Second one is the type I have, the first one is really industrial wow
|
[QUOTE][i]Originally posted by ItsMee [/i]
[B]Where do you get those huge industrial-sized PVC pipes? Are they expensive? I want to do this: [url]http://www.reefrancher.com/diy/halfpipe/[/url] [/B][/QUOTE] Check you local plumbing supply outfit. You may have to buy it in 20' lengths. |
I don't believe I have seen this link posted yet and it surprises me (unless I just missed it). It is a calculator to determine acrylic thickness for a custom sized tank. Near the bottom is a link to an excel spreadsheet that all you have to do is plug in the l x w x h and it will give you the answer.
[url]http://cyro.custhelp.com/cgi-bin/cyro.cfg/php/enduser/std_adp.php?p_faqid=133&p_created=979155189&p_sid=SUig1*Uh&p_lva=&p_sp=cF9zcmNoPSZwX3NvcnRfYnk9JnBfZ3JpZHNvcnQ9JnBfcm93X2NudD01NDAmcF9wYWdlPTE*&p_li=[/url] |
here is another plastic company. This one will even cut sheets to your spec's [url]www.copeplastics.com[/url]
|
Deberian hablar mas espanol yo creo....
|
Can we undate and condense this thread to get out the fluff, like the tank thread in the middle of this?
|
look for pet stores that are going out of business. They sell used tanks for ridiculously cheap prices. It only cost me 30.00 to build a sump/fuge out of a 20 long and some acrylic from a hardware store. That is a lot cheaper than 350.00 for one that is already made.
|
DIY, Stand and Canopy calculators
This calculator is for stands from 10 to 125 gallons. Enter the size of stand at the calculator will create a material list and assembhttply instructions: [url]http://www.idahoreefs.org/Tank/BuildStand_2.asp[/url] This calculator is for making a high profile canopy (>14" tall)with different options for doors, backs etc. Enter the size of canopy and the calculator will create a material list and assembly instructions: [url]http://www.idahoreefs.org/Tank/BuildHighProfileCanopy.asp[/url] Thanks, Scott |
Anyone know where I can get some of that plastic egg crate so that I can keep my gobies from being dare devils? I've gone to Home Depot but they havent the slightest clue what i'm talking about. I honestly dont know what the stuffs true purpose is so they dont know where to direct me... Ideas?
|
It is for light diffusion. Look in the lighting section around the florescent lighting.
|
Awesome thanks for the reply
|
wow, wish i had found this thread before i started looking all over the web for this info. just tagging this thread for now. any one know of some more DIY acrylic overflox plans with good diagrams and mesurements? id like to tweak the design a bit and a drawing would be helpful.
-nick |
Glass, glass, where can i get glass?
|
My local HD keeps the egg crate in the building materials section. No idea why.
|
guy from asia got glass drill bits CHEAP
45mm drill bit 10$ shipped i paied |
All times are GMT -5. The time now is 08:51 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.