For plastic propellers for DIY reeftec clones:
Octura Models, Inc 7351 N Hamlin Skokie, Illinios 60076 847-674-7351 Model 1250 R ( 50mm Right Handed 2 blade prop) $1.15 each 4.00 $ shipping for orders under 80.00 no minimum order Won't take visa, so you have to mail them a check or arrange COD |
R/O D/I
Is there a thread that i could find that could give me some ideas on building a DIY R/O D/I unit? I believe that i can build one cheaper than the cost of a new one. I have an idea on how they work just need some help. Any info would be great.
Thanks!!! |
DIY Lighting Systems, Bulbs, Ballasts, More.
Here's one for lighting. They carry name brands like Coralife, Ushio, IceCap, PFO Lighting and Sunlight Supply. Pretty good prices.
[url]http://www.il-solutions.com/[/url] |
MH ballasts cheap.
[url]http://www.1000bulbs.com/[/url] Also for people who have trouble finding Fulham Workhorse Ballasts. [url]http://worldlighting.org/[/url] |
For low cost, quiet fans:
[url]www.alliedelec.com[/url] here is the page it's on: [url]http://www.alliedelec.com/catalog/pf.asp?FN=432.pdf[/url] I believe the most popular model is the 50cfm Orion OA109AP-113TB or the OA109AP-113WB. At $13.50 each, you can't beat them. |
Link to reefcentral's DIY page inthe first post doesnt work. Did it get lost in the server upgrade? or is it still around?
Tom |
nevermind. it's been ages since I've actually been to the home page. got it.
|
I find the tech talks at Aquatic Eco-Systems to be a valuable resource.
[url]http://www.aquaticeco.com/aquatic1v1/resc_teck.icl?orderidentifier=ID1045756463179685831[/url] |
I have added a lot of DIY plans and links to my site
go to the DIY page of [url=http://www.aquariareview.com]AQUARIAREVIEW.COM[/URL] Theres also a list of suppliers for DIY parts Nathan G |
Here is a link to my DIY page. It has things from stands, canopys, sumps, cheap MH lighting, Has pics and drawings.
[url=http://www.mojosreef.com/DYI.html]Mojo"s Reef DIY page[/URL] |
For info on pipe threading sizes, etc
Here is a good web page that helps you determine what size of pipe threading you have, plus some pipe jargon...like what NPT means! (National Pipe Thread)
[url]http://www.ajfittings.com/performance_charts.htm[/url] V |
Glass Grinding Brass tubes
Cheaper alternative to Diamond Bits if you have a lot of holes to drill.
Information here: [url]http://archive.reefcentral.com/forums/showthread.php?s=&threadid=87270[/url] But found out that Aquatic Ecosystems has them too. For 1 3/4" search for GB6, see the related items for the powder and clay. |
great thread
|
PlumbingSupply.com
most common items are just a few cents more than savko. but they have some uncommon fittings that i didn't find at savko.
for example, they carry a 1.5" FipxMip street elbow. just what i needed to fit in 1.5" bulkheads w/o adapters. [url]www.plumbingsupply.com[/url] they're also fast shippers too :D |
nomex for thermal protection
To protect your canopy or spacers from scorching due to the heat generated by your bulbs, try using a strip of nomex between your reflector and canopy/spacer. You can find nomex at McMaster Carr: [url]www.mcmaster.com[/url]
|
To ALL:
Here's another DIY website: [url]http://www.kingvinnie.com/aquaria/diy/[/url] |
Does anyone know where to find 3-4" vent cover. I only have a 1/4 " clearence on the inside of the hood to the PC fixture
Thanks Anthony |
dumb question..can "superglue" be used to make a baffle
systm for my sump w/ plexi-glass? will superglue fuse plastic? |
No such thing as dumb questions, only dumb answers. If the sump and baffles are acrylic, use IPS Weld-On #16. If one or the other is glass, use aquarium grade silicone. Acrylic cement actually melts the two parts together forming a chemical bond. Superglue will work for a short time, but water pressure may slightly bow out the sump walls or the baffle, causing the joints to fail eventually.
|
Can't forget those all important fans -
[url]http://www.nexfan.com/[/url] [url]http://www.rcosales.com/accoolfans.cfm[/url] And I love these little gizmo's - [url]http://www.cyberguys.com/templates/searchdetail.asp?T1=121+2550[/url] David |
Where can I get venturi valves for DIY skimmer?
|
[url]http://www.floatvalve.com/[/url]
|
For a moon light, you can use a blue rope light.
|
For lighting, check out:
[url]www.ahsupply.com[/url] thanks for all the great links! Laurie |
Need source for nylon hardware
1 Attachment(s)
OK all you DIY'ers - I'm hunting for a source for nylon hardware - nuts and bolts - but I need panel nuts rather than regular nuts.
I've found some at [url]http://www.plasticnutsandbolts.com[/url] but they don't have what I need. Also tried [url]http://www.microplastics.com[/url] and they don't have it either. Both sources have splined panel nuts, which are perfect, except I need to use a No. 8 bolt/nut rather than a 10. Any other options for suppliers or manufacturers of nylon/plastic hardware? Thanks in advance, Blue |
All times are GMT -5. The time now is 11:28 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.