Pandora
05/21/2002, 07:07 PM
OK, this is what I have right now, all used except for Tetratec filter--for sale or for trade (not really looking for hardware, trade for frags or for RA vol 1 & 2). I am trying not to ship most of the larger items, on the others, I'd prefer to find a local buyer, will ship after one week of no offers. Will try and keep this list updated.
______________________________________
55 gal glass tank.
I think the make is AGA but I'm not certain. I believe 48 X 18 standard rect tank (can measure at request). No leaks, will check again before sale. Was used as a show tank, but would also make a great sump for a larger tank (it is long and narrow and will fit under most larger stands). Removeable algae & salt stains, some light scratches that are not noticeable.
$50 OBO
http://mywebpages.comcast.net/ceciliaxchen/Temp/tank.jpg
______________________________________
4 ft stand for this tank.
Pressed wood board composition, polished black finish. One cabinet door in the front. Bottom shelf is a little warped as this was where the sump sat, so I'm not that eager to sell it... if no one buys it, I will keep it as a stand for a 10gal.
$70 OBO
http://mywebpages.comcast.net/ceciliaxchen/Temp/stand.jpg
______________________________________
VHO lights in ABS hood--440 W total, 4-bulb harness actinic/white.
440 W VHO retrofit harness (ballast included) inside fully-enclosed 4' ABS plastic hood. I made this myself from the ABS box & the retrofit kit bought at "Hello Lights". Has worked really well and I will be sad to see it go, but it does not fit inside my new full hood. The light bulbs are 48" now and at this length stick out of the ABS hood (bought wrong size by accident)... I am including them because they still have a good few months of use in them left; when you change them over, you can change to 46.5" bulbs and they will fit entirely inside (have side cover, not being used currently due to length). The bulbs are 4 URI bulbs--2 actinic, 2 white--4 mos old. The endcaps are currently unmounted, but can be fixed on easily. Will include a small rigged computer fan for cooling if you buy the whole thing.
$40 OBO for ABS plastic hood alone;
$100 OBO for retrofit VHO including fully-wired bulbs & ballast (I paid $240 total)
$125 for the whole set as shown
http://mywebpages.comcast.net/ceciliaxchen/Temp/reeflight2.jpg
http://mywebpages.comcast.net/ceciliaxchen/Temp/VHOlit.jpg
http://mywebpages.comcast.net/ceciliaxchen/Temp/VHOunlit.jpg
______________________________________
250 W Utility MH
I bought this thinking I could use it with a custom hood, but it is just too big and heavy for my purposes.... maybe someone else can make use of it in a larger tank. It is a utility style MH, like for a workshop. It is 18" X 12" X 5" and quite big and heavy. Bulb needs replacing.
$50 OBO
http://mywebpages.comcast.net/ceciliaxchen/Temp/MH.jpg
______________________________________
Top Fathom Protein Skimmer TF-110C.
This is a large protein skimmer, about 2.5' tall, it is not HOB. Includes Rio 2500 pump. See the following page for more details:
http://www.aquaculture.ch/products/Top%20Fathom/top_fathom.htm
http://www.fishconnection.com/Top%20Fathom%20Protein%20Skimmers!.html
$60 OBO
http://mywebpages.comcast.net/ceciliaxchen/Temp/proteinskimmer.jpg
______________________________________
Aquanetics In-Line UV Sterilizer--15IL.
I believe it is the one shown below, which would make it 15W, non-quartz sleeve, and 320GPH flow rate, though don't quote me on that (call Aquanetics for details). Comes with instruction manual and special gasket-changing wrench.
http://www.dalecombp.com/sterilizers/
$50 OBO
http://mywebpages.comcast.net/ceciliaxchen/Temp/UV.jpg
______________________________________
2 QuietOne Wet rotor (external) pumps--UP 15-42.
SOLD
______________________________________
Overflow Box
SOLD PENDING FUNDS
______________________________________
Fluval 303 canister filter.
220 GPH (for up to 70gal tank).
$40 OBO
http://mywebpages.comcast.net/ceciliaxchen/Temp/fluval.jpg
______________________________________
Tetratec BRAND NEW mint in box HOB filter--PF150.
May be used with a heater module (so you don't need an in-tank heater), not included here. As shown below, but smaller unit with one output spout.
http://www.tetra-fish.com/tour/index.html
$25
http://petgeneral.safeshopper.com/images/o0qnizr.gif
______________________________________
Have other smaller items up for sale (powerheads, Ebo-Jager/other heaters, bio-balls, etc), along with some live fish (see live sale board), "inquire within". Selling because I am combining two tanks, and I just have a lot of extra stuff left over I need to get rid of. The tank, stand & lights must go locally (I am just north of DC, very close to 495), will not ship. The other stuff, I'd prefer to sell locally, but will ship if it doesn't sell after a week or two, but buyer must pay shipping (big & bulky). Email or PM for details. I DO NOT ACCEPT PAYPAL (I canceled my account recently, email me for details, there is a long story behind this, but they are not good with customer service at all).
______________________________________
55 gal glass tank.
I think the make is AGA but I'm not certain. I believe 48 X 18 standard rect tank (can measure at request). No leaks, will check again before sale. Was used as a show tank, but would also make a great sump for a larger tank (it is long and narrow and will fit under most larger stands). Removeable algae & salt stains, some light scratches that are not noticeable.
$50 OBO
http://mywebpages.comcast.net/ceciliaxchen/Temp/tank.jpg
______________________________________
4 ft stand for this tank.
Pressed wood board composition, polished black finish. One cabinet door in the front. Bottom shelf is a little warped as this was where the sump sat, so I'm not that eager to sell it... if no one buys it, I will keep it as a stand for a 10gal.
$70 OBO
http://mywebpages.comcast.net/ceciliaxchen/Temp/stand.jpg
______________________________________
VHO lights in ABS hood--440 W total, 4-bulb harness actinic/white.
440 W VHO retrofit harness (ballast included) inside fully-enclosed 4' ABS plastic hood. I made this myself from the ABS box & the retrofit kit bought at "Hello Lights". Has worked really well and I will be sad to see it go, but it does not fit inside my new full hood. The light bulbs are 48" now and at this length stick out of the ABS hood (bought wrong size by accident)... I am including them because they still have a good few months of use in them left; when you change them over, you can change to 46.5" bulbs and they will fit entirely inside (have side cover, not being used currently due to length). The bulbs are 4 URI bulbs--2 actinic, 2 white--4 mos old. The endcaps are currently unmounted, but can be fixed on easily. Will include a small rigged computer fan for cooling if you buy the whole thing.
$40 OBO for ABS plastic hood alone;
$100 OBO for retrofit VHO including fully-wired bulbs & ballast (I paid $240 total)
$125 for the whole set as shown
http://mywebpages.comcast.net/ceciliaxchen/Temp/reeflight2.jpg
http://mywebpages.comcast.net/ceciliaxchen/Temp/VHOlit.jpg
http://mywebpages.comcast.net/ceciliaxchen/Temp/VHOunlit.jpg
______________________________________
250 W Utility MH
I bought this thinking I could use it with a custom hood, but it is just too big and heavy for my purposes.... maybe someone else can make use of it in a larger tank. It is a utility style MH, like for a workshop. It is 18" X 12" X 5" and quite big and heavy. Bulb needs replacing.
$50 OBO
http://mywebpages.comcast.net/ceciliaxchen/Temp/MH.jpg
______________________________________
Top Fathom Protein Skimmer TF-110C.
This is a large protein skimmer, about 2.5' tall, it is not HOB. Includes Rio 2500 pump. See the following page for more details:
http://www.aquaculture.ch/products/Top%20Fathom/top_fathom.htm
http://www.fishconnection.com/Top%20Fathom%20Protein%20Skimmers!.html
$60 OBO
http://mywebpages.comcast.net/ceciliaxchen/Temp/proteinskimmer.jpg
______________________________________
Aquanetics In-Line UV Sterilizer--15IL.
I believe it is the one shown below, which would make it 15W, non-quartz sleeve, and 320GPH flow rate, though don't quote me on that (call Aquanetics for details). Comes with instruction manual and special gasket-changing wrench.
http://www.dalecombp.com/sterilizers/
$50 OBO
http://mywebpages.comcast.net/ceciliaxchen/Temp/UV.jpg
______________________________________
2 QuietOne Wet rotor (external) pumps--UP 15-42.
SOLD
______________________________________
Overflow Box
SOLD PENDING FUNDS
______________________________________
Fluval 303 canister filter.
220 GPH (for up to 70gal tank).
$40 OBO
http://mywebpages.comcast.net/ceciliaxchen/Temp/fluval.jpg
______________________________________
Tetratec BRAND NEW mint in box HOB filter--PF150.
May be used with a heater module (so you don't need an in-tank heater), not included here. As shown below, but smaller unit with one output spout.
http://www.tetra-fish.com/tour/index.html
$25
http://petgeneral.safeshopper.com/images/o0qnizr.gif
______________________________________
Have other smaller items up for sale (powerheads, Ebo-Jager/other heaters, bio-balls, etc), along with some live fish (see live sale board), "inquire within". Selling because I am combining two tanks, and I just have a lot of extra stuff left over I need to get rid of. The tank, stand & lights must go locally (I am just north of DC, very close to 495), will not ship. The other stuff, I'd prefer to sell locally, but will ship if it doesn't sell after a week or two, but buyer must pay shipping (big & bulky). Email or PM for details. I DO NOT ACCEPT PAYPAL (I canceled my account recently, email me for details, there is a long story behind this, but they are not good with customer service at all).