Grizzy
12/09/2004, 07:57 PM
For sale as a packaged deal in Tampa:
Tank -- 30g AGA (36 x 12 x 16) never used
Hood & Stand -- See pictures & descriptions below:
The trim on the stand as well as the bottom trim on the hood covers the black seal around the tank.
http://reefcentral.com/gallery/data/500/9092tank.JPG
Each side has a hole cut for a fan to be mounted.
http://reefcentral.com/gallery/data/500/9092side.JPG
Front hinges up to a stable position to allow an easy access to the tank.
The inside was painted white for reflection and was sealed with multiple coats of a minwax spar marine sealant (I think it was helmsman).
http://reefcentral.com/gallery/data/500/9092inside.JPG
Trim around the bottom of hood has a nice mitred cut.
http://reefcentral.com/gallery/data/500/9092a.JPG
Another bottom trim shot
http://reefcentral.com/gallery/data/500/9092c.JPG
Trim around the top of the hood is a little smaller. Sorry pic is so dark.
http://reefcentral.com/gallery/data/500/9092top_trim.JPG
Hard to see but there are 4 vented slits on the top to allow heat to escape.
http://reefcentral.com/gallery/data/500/9092side_hood.JPG
I put a 1 x 2 ( stand is 2 x 4's) along the top of the stand to cover the black frame & stop the tank from possibly sliding forward or side to side. It is mitred as well.
http://reefcentral.com/gallery/data/500/9092stand_trim.JPG
Spent A LOT of time & MONEY and this but have decided to go with a smaller tank. The stand is plenty stable as I have filled the tank with water as well as had my brother (200 lbs) and myself (180 lbs) sit on it together.
125.00 walks away with it (the tank retails around 65).
Reply here, pm, or email me.
Thanks,
Chris
Tank -- 30g AGA (36 x 12 x 16) never used
Hood & Stand -- See pictures & descriptions below:
The trim on the stand as well as the bottom trim on the hood covers the black seal around the tank.
http://reefcentral.com/gallery/data/500/9092tank.JPG
Each side has a hole cut for a fan to be mounted.
http://reefcentral.com/gallery/data/500/9092side.JPG
Front hinges up to a stable position to allow an easy access to the tank.
The inside was painted white for reflection and was sealed with multiple coats of a minwax spar marine sealant (I think it was helmsman).
http://reefcentral.com/gallery/data/500/9092inside.JPG
Trim around the bottom of hood has a nice mitred cut.
http://reefcentral.com/gallery/data/500/9092a.JPG
Another bottom trim shot
http://reefcentral.com/gallery/data/500/9092c.JPG
Trim around the top of the hood is a little smaller. Sorry pic is so dark.
http://reefcentral.com/gallery/data/500/9092top_trim.JPG
Hard to see but there are 4 vented slits on the top to allow heat to escape.
http://reefcentral.com/gallery/data/500/9092side_hood.JPG
I put a 1 x 2 ( stand is 2 x 4's) along the top of the stand to cover the black frame & stop the tank from possibly sliding forward or side to side. It is mitred as well.
http://reefcentral.com/gallery/data/500/9092stand_trim.JPG
Spent A LOT of time & MONEY and this but have decided to go with a smaller tank. The stand is plenty stable as I have filled the tank with water as well as had my brother (200 lbs) and myself (180 lbs) sit on it together.
125.00 walks away with it (the tank retails around 65).
Reply here, pm, or email me.
Thanks,
Chris