mylittleocean
10/13/2004, 09:20 PM
Well, here we go. I got the tank set into place tonight. I have an AGA 180 w/ corner overflows. The back has been drilled for five 1" bulkheads and one 1.5" bulkhead for a closed loop. I have a Seq Aspen Value Flow w/ SW seals (4300 gph) for the closed loop. Underneath will be a 125g sump/frag area. I made a beckett skimmer w/ Iwaki 55 that I will be running the system. The return will be provided by an Iwaki 40 (for now) w/ a tee to feed the refug. The refug is 55g and located side wall above the main tank. Sink is in the corner opposite the refug. RO/DI will be hooked up tommorrow and tank filling will begin. :)
The stand is 1.5" x 2.5" steel. The fishroom side has a pratt truss to keep from having a center brace. The viewing room side has a center brace. Thanks davetkoch. Thread on the stand design. (http://archive.reefcentral.com/forums/showthread.php?s=&threadid=410117)
Here are some pics of the progress...
Stay tuned......
front
http://reefcentral.com/gallery/data/584/61616Front.jpg
front
http://reefcentral.com/gallery/data/584/61616Front2.jpg
Back
http://reefcentral.com/gallery/data/584/61616Back.jpg
Fishroom
http://reefcentral.com/gallery/data/578/61616Fishroom.jpg
Soon to be front
http://reefcentral.com/gallery/data/584/61616stand_front.JPG
diagram of the stand
http://reefcentral.com/gallery/data/584/61616stand1.JPG
My DIY skimmer
http://reefcentral.com/gallery/data/500/61616DSC00027.jpg
The stand is 1.5" x 2.5" steel. The fishroom side has a pratt truss to keep from having a center brace. The viewing room side has a center brace. Thanks davetkoch. Thread on the stand design. (http://archive.reefcentral.com/forums/showthread.php?s=&threadid=410117)
Here are some pics of the progress...
Stay tuned......
front
http://reefcentral.com/gallery/data/584/61616Front.jpg
front
http://reefcentral.com/gallery/data/584/61616Front2.jpg
Back
http://reefcentral.com/gallery/data/584/61616Back.jpg
Fishroom
http://reefcentral.com/gallery/data/578/61616Fishroom.jpg
Soon to be front
http://reefcentral.com/gallery/data/584/61616stand_front.JPG
diagram of the stand
http://reefcentral.com/gallery/data/584/61616stand1.JPG
My DIY skimmer
http://reefcentral.com/gallery/data/500/61616DSC00027.jpg