Typhoon III just purchased - where to place?

[Fischer]

My home water system consists of the following:

-Well water

-Rotten Egg Smell remover
- this unit consists of a 60 Gallon holding tank, a very large Carbon Filter and a Chlorine injector. The water flows through the Chlorine Injector through the carbon filter and into the holding/pressure tank.

- Water softner (iron remover)

Now, I already have a Drinking Water RO unit installed *after* all of that.

This, may be the wrong place for it and because the Reef system is a bit more important than my own taste buds, where would you locate the new RO/DI unit? Before everything? After the softner, but before the Rotten Egg Smelling unit? After Everything?

Thanks!

-Tim

[rtrice1]

Hmmm, I would say attach the supply hose to the pipe that will provide the drinking water. Verify that you have good presure at that location. I chose to install mine to the cold water pipe that feeds the water heater. If you install your R/O unit in the area where the water has not been filtered, your R/O filters and membrane in the unit will not last long.