Missyshrout!

[Twisted]

You PM is full, but I just talked with Matt and he said you are more then welcome, That makes four of us which would mean he is driveing, if anyone else decided to go we would have to take my minivan which mean I would be driving <but I prefer he drives!> . I will ask him about Orland <don't see a problem> and gas money.
But we are glad you decided to go, everyone has told me this frag swap is not to be missed.
The address for the swap is 370 E. Mayes Street. Dixon, CA if you want to mapquest it just to see where we are headed, it is 2.5 hours from Redding so not too far at all. Check in as at 11am and the swap starts at noon, or 12:30 so we want to get there around 11, 11:30 so we should leave Redding around 8, 8:30ish.

[missyshrout]

I will clean out my pm box, thanks. So how long does it take to get to Orland from Redding?

[shelbiesdaddy]

Wow, you have a whole thread named after you. You must be famous.

[missyshrout]

Bite me! You know that I am a special person anyway.

LOL!!!!!!!!!!!!!!1

[shelbiesdaddy]

Did you ride the "special bus" to school?

[kinghokus420]

im trying to talk my wife into it so it may be minivan time!!

[missyshrout]

that would be really cool

[missyshrout]

Also if there are 2 of you thats lots more frags to get.

[kinghokus420]

let me re-phrase that..im working on a way for me go. she has something in san jose that weekend. its really just a matter of finding a grandma thats not busy.i will find out in the next day or two.

[Twisted]

Not sure on the time from Redding to Orland, I will check this afternoon, but pretty sure it's over an hour.

Kinghokus that would be great, just let us know!

[foodstamp]

<a href=showthread.php?s=&postid=10831123#post10831123 target=_blank>Originally posted</a> by Twisted
Not sure on the time from Redding to Orland, I will check this afternoon, but pretty sure it's over an hour.

Kinghokus that would be great, just let us know!

that depinds on whos driving..... ;) and what part of redding your leaving from & what orland exit u want..... orland is 12 miles from corning is 15 from redbluff is 34 from redding = 61/70 mph = 86% of n hr or 53 mins ( thats if your just counting freeway min's)

from umpque bank in redding to umpque in redbluff then to umpque in orland is 1 hr n 15 mins taking 5 mins per bank to rob :D willows umpque bank is about 20-25 mins from there CHP is heavy from orland to willows be on your toes there hitting ppl for as little as 2mph over.....

[Twisted]

wow, you just made my head hurt.....

Hey your into banks...can I get a loan? :)

[foodstamp]

<a href=showthread.php?s=&postid=10832640#post10832640 target=_blank>Originally posted</a> by Twisted
wow, you just made my head hurt.....

Hey your into banks...can I get a loan? :)

wish i could get one my self.....
i own a delivery survice in the north state and have ppl running from redding to willows then to yuba city 4 times a day with bank work.... :rollface: i allso have ppl in chico/paradise & mt shasta/yreka area.....

[Twisted]

delivering what? I always wanted one of those nice delivery jobs that just run around delivering documents, and xrays and stuff. I always got stuck with heavy stuff like produce.

[foodstamp]

<a href=showthread.php?s=&postid=10833242#post10833242 target=_blank>Originally posted</a> by Twisted
delivering what? I always wanted one of those nice delivery jobs that just run around delivering documents, and xrays and stuff. I always got stuck with heavy stuff like produce.

manly bank work & pharmaceuticals but have delivered just about everything u can think of film, eyeglasses,dentures,payroll, medical pot, movie returns even did food shopping for ppl... u would be supprized on how much ppl want taken from one place to the next & how much there willing to pay to get it there....

[Twisted]

nice. if you have a big enough truck you can start chargeing coral frags for moving tanks for people.

[foodstamp]

<a href=showthread.php?s=&postid=10833623#post10833623 target=_blank>Originally posted</a> by Twisted
nice. if you have a big enough truck you can start chargeing coral frags for moving tanks for people.

o i have the truck's...... but for us it could come inhandy trading stuff back n forth from redding to chico its a pertty long drive to pick up a frag pump,sand ect......

[Twisted]

well me and my nieghbor drive from Redding to Chico for the reef club meetings every months, so during that drive down we can haul something too if need be.

[foodstamp]

im gonna make it to this one coming up so all see u there....

what size tank u looking for?

[Twisted]

Bah, never really changed that comment, I am actually holding off on a bigger tank while I rebuild the motor for my Firebird, I can't afford to do both.

I was looking for a big tank, 150/180 with built in overflows, but I will wait....impatiently.....priorities....must finish car.....ahhhhhhh.....my head!

[foodstamp]

<a href=showthread.php?s=&postid=10836159#post10836159 target=_blank>Originally posted</a> by Twisted
Bah, never really changed that comment, I am actually holding off on a bigger tank while I rebuild the motor for my Firebird, I can't afford to do both.

I was looking for a big tank, 150/180 with built in overflows, but I will wait....impatiently.....priorities....must finish car.....ahhhhhhh.....my head!

what yr firebird? my dad has a 68 with a 400.....

i might be able to get a 125 some what cheap all talk to the guy in the morning he has 2 of them in his storage there both glass i was thinking of getting one and using my 80gallon as a sump im sure if i went at him for both i could get them really cheap

[Twisted]

it's a 69 firebird I am putting together a 455 the 400 took a dump.

Thanks for the offer on the 125, but being glass it probablly lacks the overflows and I really need to go that route, want to be able to go all the way to the wall.

[foodstamp]

<a href=showthread.php?s=&postid=10837282#post10837282 target=_blank>Originally posted</a> by Twisted
it's a 69 firebird I am putting together a 455 the 400 took a dump.

Thanks for the offer on the 125, but being glass it probablly lacks the overflows and I really need to go that route, want to be able to go all the way to the wall.

from what i have read cutting holes are easyly done with a dremel tool

[kinghokus420]

very easy.just not in the bottom

[foodstamp]

<a href=showthread.php?s=&postid=10837442#post10837442 target=_blank>Originally posted</a> by kinghokus420
very easy.just not in the bottom

i belive it was ur thread i was reading

[kinghokus420]

nope, im not gonna make it. fundage just went to 0.
stupid jeeps.

[Twisted]

Sorry to hear that. But it is typical, got something you work on trying to do, and boom, something breaks...

My firebird has me on hold for a lot of things, but I started planning this trip a long time ago, so I am good to go so far. Just going to go into debt a little further in January, Febuary area to finish the motor.

[boviac]

Thanks Brian for taking the lead on this. I appreciate everyone's interest for the frag swap as it really is a phenominal event for people with limited corals and wish to stock with more.

Josh, sorry to hear about your operational repairs causing subsequent loss of funding for aquascaping of your 135. We'll probably be doing somethin more local in the next 6 to 9 months if all goes will.

[Twisted]

Actually have to get together with the guy that owns the store I work at once in awhile, and see, but I think he is planning a frag swap in the near future, we were originally only waiting for the time and date of the Dixon swap to make sure we didn't overlap it.
I will talk to him soon on this and see if we can finalize a day.

[Twisted]

Hey! Mellisa! I sent you another PM!

[missyshrout]

I didn't get a pm from you yet.