- Please help me. I'm in deep
- 2x2 enought?
- Great deal for powercenter DIY
- plexi enuf
- sealant or glue
- Combine glass/acrylic
- Add more baffles while in service
- in wall project
- Light blue acrilyc sheets
- Scratch Removal?
- Black Drain/wast/vent PVC ok for sump?
- weld-on
- what do i need to diy new mh lighting system?
- slightly elevated bottom panel on glass tank.
- Nylon Thumb screws
- Need a DIY 96 w PC ballast
- maxi stream maxi go?
- glued pvc connections. Wait?
- Building lots diy need help
- Tek -> IceCap Conversion
- Loc-line used in return? reducers needed? Help!
- Any tips on building a 150g Refugium
- DIY rock, useing layers to make huge formations
- Wayne's Coating Aquarium Stand.
- Sump/Refugium design for 40 gallon reef??? HELP?!?!
- New Sump, Now microbubble
- Questions about waterproofing my DIY wood canopy
- DIY Injector
- diy Skimmer?
- Building my own sump
- Removal of plastic frame
- How do you make PVC shelves for live rock???
- Question about Sump / Refugium
- drilled tank?
- Recommendation on Sump/Refugium
- Help wiring computer fans!!!!
- DIY jellyfish tank
- Critique my Sump Design Please
- Sump baffles
- Dividing a tank efficiently
- my diy 4500 gph! eheim pump
- suggestions for an auto top off?
- penguin power heads any good ?
- back glass options besides painting?
- Skimmer repair Help
- plumbing an iwaki pump
- seio question
- Anyone know of a DIY skimmer for a 30G
- Placing the baffles in my sump/refugium
- Plumbing!
- Black Eggcrate?
- Need input on 125 stand designs???
- DIY Denitrator
- Gas Lift Struts?!?
- Does anyone Really want another thread about a DIY Chiller?
- Who sell propagation tanks?
- Does anybody know a good place to purchase Weld-on acrylic glue online?
- Rust-Olium Metalic Paint (spray can)?!?! Experience?
- Sump Design Review
- Overflow ?
- Eheim in place of Aquabee for deltec reactor
- CSS skimmer mod
- Anyone using Salt Lake Oolitic Sand ?
- Nano Cube Sump/Ref
- Fuge flow
- Novus acrylic polish hints?
- Stand
- Flood light
- Here is a leaky PVC fix...
- Aquahub I-Float Switch and Exposed Magnet
- Oceanic Overflow
- Closed Loop Plumbing over top of tank
- Refugium HOB plans
- Fans and MH
- Anyone ever done a batter powered maxi jet???
- Waiting for Glued Acrylic to be non-toxic
- Which needlewheel pump will work?
- Stand construction
- How do you figure headloss with spa-flex?
- Slanty floor blues
- Removing aquarium glue.
- turf algae scrubber
- Do I realy need a bulkhead?
- duplexium sump
- 30 gal stand DIY pics
- Test
- Prugs Bubble Extractor
- DIY Hanging Canopy
- I want to build a refugium
- replacement pump for needlewheel skimmer
- DIY Waste Collector
- Black silicone?
- Covering up drilled holes in bottom of tank?
- Where did Hofer GO? Dissapeared like Hoffa.....?
- Reverse Photosynthesis Refugium
- Surgedevice with sprinkler solenoid
- My DIY Aquabee 2000-1 Powered Skimmer
- Steel stand question...
- How does this work...
- tank perimeter trim???????....and back wall drain vents..
- Anyone Mod a CPR BAKPAK2
- Fan and lights disconnect ?
- Undulate Trigger. Maroon Clowns. Same tank.
- overflow silencing
- Cost of starphire glass
- fuge parts list...please help
- LED Lighting project
- DIY stand and canopy plans
- Is 1/2" glass thick enough?
- automatic daily water changes
- DIY 2x2x2 Stand
- Dumb Plumbing question
- tank being drilled, hole location? + parts list
- adding MH's
- Paint for DIY plywood tanks
- Need advice on DIY collection cup drain
- acrylic thickness for new sump?
- Diy
- Reflectors for 36" bulbs
- Any bulkead tools?
- Adding a Recirc. to a normal NW Skimmer?
- What thickness do the baffles need to be for my sump?
- got me some free M59 400W lights!
- Show me your plumbing
- no center brace
- top off idea
- Looking to build a DIY probe holder, and I'm looking for ideas...
- Plywood Acrylic or Glass?
- 1/8" wall acrylic tube tank?
- DIY Acryllic Weir
- Gen X 40 with a SCWD wavemaker?
- Suggestions on sump design, please
- good starter weld-on
- Feeding Recirc Skimmer From Overflow
- What lighting over DIY HOB filter fuge?
- hole location for external pump in sump
- Acrylic for DIY sump
- weld on 4
- DIY MH canopy
- automating salt adding
- Just starting out.
- Will my stacked sump design work??
- Maxi jet mods
- what glass for sump?
- Wood question
- Plumbing two bulkheads into a sump
- sump layout for FO
- problem painting DIY Acrylic tank
- My DIY Pendant
- CL stand?
- DIY Calcium Reactor mod for cannister filter
- AquaClear Refugium
- Tempered glass question
- Help clear up some controversy on DIY Glass Tanks
- Durso Problem
- paint/markers in tank
- Megaflow Durso --- why the extra holes?
- DIY venturi
- DIY 5g Waste with shut off
- 65g tankers, what are you using for your sump?
- How can I make the easiest in tank skimmer?
- sump/refuge set up Question, please help
- DIY LED lighting MH replace
- help with baffels please
- DIY canister filter??
- Rock rack??
- closed loop pump selection
- Gen-X 100 NW venturi
- Bubble diffuser plate for SPAZZ approval :-P
- o-ring for 4.5 in ca reactor
- Hard time finding plumbing parts
- silicone lubricant on gaskets?
- carbon+phosban reactor
- Krylon Fusion - Gloss or Satin
- Acrylic supplier in Chicago?
- Acrylic Question?
- High temp problems
- my 72 b/f canopy (pics inside)
- How do I get rid of scratches?
- Need Help With Overflow Box
- Uniseals leak
- can spar be applied on polyurethane
- Info on cheap chiller and pump in FL
- Calfo-esque overflow, thinking outside the box
- More plans for my DIY skimmer
- mjmods.com safe?
- Plumbing Help
- Running a 277v ballast on household current?
- baffle height
- Cleaning gummy glue off acrylic
- Glass Hole Saw Question???
- The Javo Insignificant
- T-5 Endcaps
- DIY Canopy photos
- DIY overflow design needed.
- I hate that water crashing sound
- Need help with sump design
- Some basic plumbing questions
- CA reactor turnover rate
- CA reactor turnover rate
- Micro bubble filter!
- Need help designing Overflow for 37 gal Oceanic
- Plexi glass tank?
- Plexi glass tank?
- Want to know what kind of metal that Lumenarcs are made of???
- Problem mounting your MJ Mod? Look here.
- repaint Iwaki pump
- acrylic overflow box, who makes them?
- dual aquapod stand ideas needed
- WON heater rewire
- float switch source?
- need help deciding on a replacement skimmer pump
- prefilter instead of overflow guards?
- diy venturi...too much air?
- Seio question
- Retrofitting a horizontal overflow to existing vertical overflow
- OT: Light in baseboard
- MJ-1200 mod
- Tubing for peristalic pumps
- Scratched Glass Tank
- Sump Design - A little Different.
- user control panels
- show me your DIY calcium reactors
- sump/overflow
- sump design help
- DIY MJ Mod mounting bracket. Improved version.
- What to clean glass with befor siliconing
- center brace modification.
- holding acrylic together
- Where to buy acrylics tanks ??
- Auto top off question
- glass/acrylic sump DIY?
- skimmer section footprint question?
- Toter Bin / Leaching
- Float switch suggestions?
- Maxistream Vibrations
- plexiglass question
- Protein Skimmer Bubble Injection Expert Opinions Needed
- DIY cabinet for my ballasts and fuses
- bubble baffle design question
- Computer fans for cooling
- Warped 2x4
- will this sump plan work?
- Uniseal Leaking
- Need Help Designing Overflow
- bulkheads + surface skimming tube...
- Aquarium trim?
- un bricoleur francais
- Uncured PVC Cement got in water column!!!!
- Water Change System? Please critique